Cath Lab ETO Sterilizer

Exclusive Features of Cath Lab ETO Sterilizer

• The cycle operates in vacuum and hence is safer to operate, as there is minimum chance of leakage.
• The electronic design provides accuracy of operation, dependability and repeatability.
• The sterilizer can aerate items after sterilization same Machine. The sterilization-aeration process can be continuous in one chamber and hereby eliminate gas exposure during load transfers to aerators.
• After the sterilization cycle, the chamber is purged or aerated continuously until the door is opened. This prevents a buildup of ethylene oxide from items aerating in the chamber.
• The actual volume is more than that of the Standard sterilizer, although the machine is compact in size.
• The use of ‘VALVE’ makes the operation of the cycle very easy.
• Ethylene Oxide Gas cartridges contain calculated quantity of EO 100%, which ensures the right concentration of EO to achieve Sterility.
• Pure EO cartridges are very handy, easy to carry, store and to use.
• As the cartridges are of single use type with fixed gas concentration in relation to chamber, over exposure which leads to higher residual level of EO gas in the sterilized products, and under exposure which leads to non-sterility are ruled off.
• No more cylinder deposits.
• No more hassles of cylinder transportation, EO cartridges are very light and can even be dispatched at a very short notice.
• Operational Safety: – As the entire sterilization cycle operates under negative pressure (under Vacuum), possibilities of gas leakage/exposure to EO gas (as in the case of cylinder models) is almost nil.
• A Vacuum cycle helps in an overall better performance of the machine and is very ideal for operational safety.

Process of Ethylene Oxide Sterilization

Ethylene Oxide Sterilization (Sterilization) offers various distinct advantages over the conventional steam sterilizers (sterilizers), being a DRY & COLD (operates at 50ºC ) process proves very useful in sterilization of expensive items, also it has got a unique penetration ability, so it is very useful in sterilization (Sterilization) of expensive and delicate items such as Cardiac catheters, Stents, IOL’s Tubing’s, various types of scopes, sharp surgical instruments etc., its unique mode of action, also enhances the life of several surgical accessories & disposables items thus making them perfectly reusable.

Types of EO Gas Sterilizers

We are one of the leading EO Gas Sterilizer manufacturer in India. We manufacture below two types of ETO sterilizers:

1. Semi-Automatic Operation Mode EO Sterilizer: In this type of control mode there are analog type buttons onto control panel of the machine through which machine operation procedure will be done.
2. Fully Automatic Operation Mode EO Sterilizer: This is PLC HMI based fully automatic control mode equipment in which there is HMI mounted onto control panel of the machine through which operation procedure done.

Technical Specification of Cath Lab ETO Sterilizer

Model	AETOS – 2.6	AETOS – 4.5	AETOS – 8
Working Capacity in Cu. Ft.	2.6	4.5	8
Working Volume	70 Liters	125 Liters	200 Liters
Chamber Size	12” (W) x 12” (H) x 32”	12” (W) x 12” (H) x 54” (D) OR 15” (W) x 15” (H) x 36” (D)	20” (W) x 18” (H) x 38” (D) OR 16” (W) x 16” (H) x 54” (D)
Sterilant Gas	40 grams cartridge	100 grams cartridge	170 grams cartridge
Sterilization Cycle	Warm & Cold Cycles are possible.	Warm & Cold Cycles are possible.	Warm & Cold Cycles are possible.
Aeration	In-built aeration facility provided.	In-built aeration facility provided.	In-built aeration facility provided.
Utility	Compressed Air (100 psig)	Compressed Air (100 psig)	Compressed Air (100 psig)
Power Supply	1 K.W.	2 K.W.	2.5 K.W.
Power Voltage	220 volts, Single Phase, 50 Hertz	220 volts, Single Phase, 50 Hertz	220 volts, Single Phase, 50 Hertz