Pre Filled Syringe Filling Machine

Exclusive Features of Pre Filled Syringe Filling Machine

• Compact GMP Model.
• Higher filling accuracy of ±1% in single dosing.
• PLC operated elegant and easy control panel for total control on operation.
• Rigid vibration free construction for trouble free performance.
• Stainless Steel elegantly matt finished body.
• Minimum change overtime, from one size to another Syringe or fill size.
• All the contact parts made from Stainless Steel 316 material.
• Machine is a Compact, elegant and matt finished made with SS 304.
• Stainless Steel 316 Vacuum Chamber.
• Pneumatic controlled Stoppering head.
• Elegant and easy control panel for total control on operation.
• Minimum change overtime, from one size to another container.
• IQ/OQ documentation can be provided.
• PLC system with Graphical User Interface can be offered.
• Inbuilt Laminar Air Flow can be offered for sterile class 100 filling.
• Sampling and Rejection system can be provided on demand.

Working Principle of Pre Filled Syringe Filler Equipment

• Syringes has to be load onto a tray of 100 pre filled syringes (depends upon syringe size) onto Stainless Steel Stand. After loading procedure, tray has to be put onto filling station of the machine.
• Operator has to start filling operation from control panel of the machine.
• Automatic filling cycle starts in 10 steps with at a time 10 syringes will be filled with help of Stainless Steel Valve less Syringes.
• After Filling Operations, one has to taken back tray of filled syringes and have to load onto the stoppering unit. Stoppering Unit is having similar type of tray loading mechanism as of Filling Unit.
• After loading one has to close the evacuation & Stoppering chamber.
• Now, start the stoppering operation from the control panel of the machine.
• Automatic stoppering cycle starts one by one as per the programmed Stoppering cycle mentioned as under. 100 Stoppers are plugged into the Pre-filled syringes precisely after vacuum hold cycle. (Stoppering & Evacuation cycle details is mentioned in below of this page)
• Now last cycle of nitrogen flushing with vacuum break completes the Stoppering operation.
• Now syringes are filled and stoppered. One can unload Tray from the machine for transfer it in desired area.

Technical Specification of Pre Filled Syringe Filler

Model	ZSPFSM – 40
No. of Filling Syringes	Two
Tray Holes	10 rows x 10 nos. = 100 holes
Filling Volume	0.5ml to 5ml
Production Output	Up to 1440 syringes/hour
Filling Accuracy	± 1%
Utility	Purified Air and Nitrogen
Electrical Characteristics	230 Volts, Single Phase, 50 Hertz, 4 Wire System
Contact Parts	Made from Stainless Steel 316L
Non-Contact Parts	Made from Stainless Steel 304
Overall Dimension	1300mm (L) x 600mm (W) x 1200mm (H) approx.
Net Weight	250 kgs. approx.
Gross Weight	375 kgs. approx.
Change Parts – Filling Unit	Filling Syringes for 5ml – 10ml (If required)
Change Parts – Stoppering Unit	Plunger Pressing Pin Head Plate (SS 316) SS 316 Plunger Plate

Send Inquiry